Vacuum packaging technology is a new concept with absolute advantages. This packaging technology has helped many new brands and new formulas go on the market smoothly. Once the vacuum packaging is assembled, from filling the packaging to consumer use, almost minimal air can enter the container to contaminate or decompose the contents. This is the advantage of vacuum packaging. It provides a safe packaging empty for the product, avoids contact with air, reduces the most likely changes and oxidation, especially the delicate natural ingredients that are in urgent need of protection. In the call to avoid adding preservatives, vacuum packaging is very important Extending product shelf life is more important
Vacuum-packed products are different from standard pumps or spray pumps with common straws. Vacuum packaging uses the principle of separating the inner cavity to squeeze out the contents. When the inner diaphragm moves up to the inside of the bottle, a pressure is formed, and the contents are present in a vacuum state close to 100%. Another way to vacuum is to use a soft vacuum bag, which is placed inside a rigid container. The concept of use of the two is almost the same. The former is widely used and is a very important selling point for brands, because it consumes less resources and can also be considered "green".
The contents of the airless cosmetic container can be completely isolated from the air to prevent the product from being oxidized and deteriorated due to contact with the air, and the breeding of bacteria, and its high-tech concept is used to upgrade the product. The vacuum bottle in the market is composed of a cylinder into an ellipsoid container and a piston at the bottom. Its design principle is to use the contraction force of the spring to prevent air from entering the bottle, resulting in a vacuum state, and to use atmospheric pressure to push the piston at the bottom of the bottle forward. However, because the spring force and atmospheric pressure cannot give enough force, the piston cannot be too tightly attached to the bottle wall, otherwise the piston will not be able to move forward due to excessive resistance; on the contrary, if the piston is to move forward easily and easily leak material, Therefore, airless bottles have very high professional requirements for manufacturers.
The airless bottle of the cosmetic packaging bottle manufacturer has an oval or off-round shape container, and then there is a freely movable piston at the bottom of the bottle. The working principle is to use the elastic nature of the spring and evacuate the air in the bottle. Keep the bottle in a vacuum state, and then use some pressure to make the piston inside the bottle move.
Many skin care products contain ingredients such as protein, as well as some amino acids and hyaluronic acid, which are easily contaminated by bacteria. Therefore, you must pay attention to keeping it clean. If contaminated, it will cause damage to the human body. Hazardous substances too. The airless bottle can isolate the contents from the air, and will not easily oxidize with the air, and will not lose some of the original effects.

Posted by: bottlempactes at 03:34 AM | No Comments | Add Comment
Post contains 540 words, total size 3 kb.

As people's awareness of environmental protection increases, a packaging container called "ecological glass bottle" is also an important development direction for glass cosmetic containers in the future.
The main market for glass cosmetic containers can be roughly divided into three parts: beverage containers, food containers, and small containers for cosmetics and pharmaceuticals. In recent years, although the demand for glass packaging containers in the international market has been on a downward trend, glass packaging containers are still the main packaging materials for beverages and medicines. In order to adapt to the fierce competition in the international packaging market, some foreign glass packaging container manufacturers and scientific research departments continue to introduce new equipment and adopt new technologies, which has made a lot of progress in the manufacture of glass packaging containers.
The major feature of glass cosmetic containers that is different from other cans or paper containers is that they have the transparency to clearly see the contents. But it is precisely because of this that light from outside can easily penetrate the container, causing the contents to deteriorate and deteriorate. In particular, ultraviolet rays have a great impact on the contents, and there is an urgent need to develop a colorless and transparent glass cosmetic container that can block ultraviolet rays.

Glass cosmetic containers are large in quality and easy to break. In order to improve their competitiveness, achieving lightweight and high strength glass cosmetic containers is a development direction.
To reduce refractory stones, high-quality refractory materials must be selected. Generally speaking, the porosity of refractories, structural density, uniformity of microstructure, masonry quality, melting temperature, alkalinity of the glass itself, melting stratification, and the types of raw materials used are closely related to it. Common refractory stones are alumina-siliceous stones such as mullite, nepheline, leucite, etc.
In order to meet the needs of the market, more and more customers have put forward multi-variety, multi-functional, and small-batch requirements for the color, shape and label of glass cosmetic containers. It is in this situation that coated thin-film glass cosmetic containers appeared. The film-coated glass cosmetic container also has the following advantages: it can prevent the surface of the glass bottle from being damaged due to collision and friction between the containers; it can cover the original fine scratches of the glass cosmetic container and increase the compressive strength of the container by 40% the above.

Posted by: bottlempactes at 03:24 AM | No Comments | Add Comment
Post contains 401 words, total size 3 kb.

A vacuum flask refers to a container that can isolate gas from the outside temperature or a container that isolates external bacteria. Its contents can be completely isolated from the air to prevent the product from being oxidized and deteriorated due to contact with the air, and to breed bacteria. It also uses its high-tech concept to upgrade the product level. The vacuum bottle in the market is composed of a cylinder into an ellipsoid container and a piston placed at the bottom.

Its design principle is to use the contraction force of the spring to prevent air from entering the bottle, creating a vacuum state, and to use atmospheric pressure to push the piston at the bottom of the bottle forward. However, because the spring force and atmospheric pressure cannot give enough force, the piston cannot be too tightly attached to the bottle wall, otherwise the piston will not be able to move forward due to excessive resistance; on the contrary, if the piston is to move forward easily and easily leak material, Therefore, airless bottles have very high professional requirements for manufacturers.

The packaging styles of the cosmetic container airless bottle are different, and each customer has different preferences. Customers can choose the corresponding airless bottle style according to the consumption level of the brand positioning and the crowd. Generally, the price of airless bottles will be relatively higher, and the style will be different. There will be differences, customers can choose according to brand positioning!

Although the introduction of cosmetic plastic container airless bottles conforms to the new development trend of skin care products, it can effectively protect the fresh quality of products. However, due to the complicated structure and high cost of the vacuum bottle, the use of vacuum bottle packaging is limited to a limited number of categories of products and cannot be fully deployed in the market to meet the needs of different grades of skin care products.

The packaging styles of airless bottles are different, and each customer has different preferences. Customers can choose the corresponding airless bottle style according to the consumption level of the brand positioning and the crowd. Generally, the price of airless bottles will be relatively higher, and there will be different styles. The difference, customers can choose according to brand positioning!

Posted by: bottlempactes at 03:03 AM | No Comments | Add Comment
Post contains 393 words, total size 3 kb.

Two most important tools for cosmetic companies to improve and develop their image are marketing and sample packaging services. Free cosmetic samples packed nicely help cosmetic companies to launch new products or to reach new markets thus enhancing profitability. Most cosmetic and other consumer product companies are using these techniques and getting best results. To ensure that this marketing technique works well, suggestions of marketing professionals with the right knowledge and experience must be adhered to.

By using FREE sample marketing strategy to its advantage, any company can introduce or sell its products to potential buyers. It is a method used to attract more customers and improve the overall profitability of any company. Marketing and sample packaging is especially popular in cosmetic industry as the consumers first wish to try the products before actually buying them as they are expensive. Marketing samples are therefore used in cosmetic businesses as a popular marketing component. Cosmetics rely heavily on the image perceived by customers, cosmetics are bound to use this method if they want to reach their goals. Therefore, cosmetic companies aim at taking best marketing and sample packaging services by improving their image in the eyes of the audience.

Sample packaging is used by most firms in the beauty industry to allow potential customers know what the product is like. By seeing the sample package, people readily want to try the product. A sample packaging service is therefore very important part of a marketing campaign. An attractive and handy package can add to the overall appeal of a product. With impressive marketing and sample services, you can compel the users to first try your product and then buy it once they are satisfied.

Usually, big companies have their own packaging departments, but many other cosmetic companies rely on other firms that offer specialized services. Marketing and sample packaging services are offered by professional and specialized companies these days. They research the market and then develop a strategy for each product separately. If talking about marketing, they usually first find out what the customers want or need and then try to respond to these needs. For packaging services, it is very important that the package meets some key characteristics like: attractiveness, accessibility, informative and if possible are recyclable.

By considering all these aspects, any business can understand how beneficial sample packaging is for their success. Maybe more than others, cosmetic companies need to use marketing and sample packaging services to assure that they reach their market in the best way. Not only it is to their advantage using them, but it becomes almost an essential part of any business in this sector. Cosmetic companies rely heavily on marketing services to sell their products and the sample packaging services are used to encourage the consumers take the first step to buying which is trying the product.

Posted by: bottlempactes at 02:39 AM | No Comments | Add Comment
Post contains 483 words, total size 3 kb.

Perfumes don't come cheap and the last thing that you wish when buying expensive perfumes is for them to lose their aroma or fragrance completely following a few days or months. So are there any ways to prevent this from happening? Well, there are quite a few and this article summarizes four of the best ways by which you can store perfumes so that they retain their smell for a longer period of time.

Even the most cheap perfume and expensive perfume can lose its potency due to exposure to light, heat and air. Therefore it is necessary that you keep your perfumes as much away from these elements as possible.

The first step towards storing perfumes is to completely eliminate their exposure to sunlight. Though it may be easier to keep it on the dressing table for easy retrieval, refrain from doing so. Sunlight contains harmful UV rays which can not only alter the fragrance but also change the color of the liquid and make it darker over a period of time. So the best way to prevent sunlight from affecting your cheap perfume or expensive perfume is store it inside a drawer which would prevent the sun's rays from coming in contact with it.

Of light, heat and air, the last one is regarded as largest factor that leads to the degradation of perfumes. Oxygen has a property of oxidizing fragrances at molecular levels which alters perfume odor over a period of time. The best way to combat this problem is to use a sprayer for an open bottle or buy spray perfume bottles. With spray bottles, one never has to remove the lid due to which oxygen is prevented from coming in contact with the fragrance. The other benefit of using a sprayer is that the perfume won't come in contact with the skin which is known to cause contamination.

Immediately replace the perfume cap once you have finished spraying because fragrances are known to evaporate through extremely small openings in the perfume bottle which includes the nozzle of the spray. When you pay a premium for a fragrance, it is necessary that you utilize it fully. Therefore following use, replace the perfume cap instantaneously.

Always store your perfume in a cool, dry place. Many people have a tendency to store their perfumes in bathrooms which are exactly not the right places for fragrances as they cannot stand humidity and heat. There are people who are known to store their perfume bottles in refrigerators but it does look odd and moreover there is a chance that the perfume smell may spread onto the fruits and vegetables. Therefore it isn't advisable to keep perfumes in the fridge. Instead stacking perfumes in shady places where the temperature fluctuations aren't rapid is the best way to increase the longevity of your perfume.

Always remember that though perfumes don't require intricate care, total ignorance can lead to reduction in the shelf life of the product and when you are paying a good chunk of your money in buying fragrances, you as well take proper care of it.

Posted by: bottlempactes at 03:29 AM | No Comments | Add Comment
Post contains 523 words, total size 3 kb.

The vacuum bottle that we often see now is composed of an ellipsoidal container and a piston, which is generated by the force of a spring. The contraction force is used to prevent air from entering the bottle, and then atmospheric pressure is used to move the piston forward. But what we must pay attention to is that the contraction force between the piston and the bottle wall cannot be too large, otherwise it will be particularly difficult for us to advance. Of course, if you can move forward with special force, it will also affect normal use, and there will be leakage, so the requirements for manufacturers are high.
It can be said that the introduction of airless bottles has brought us great convenience, especially for the female cosmetics industry. It can effectively ensure the quality of the product and maintain the freshness. But because the structure of the vacuum is more complicated, the price is relatively high. At present, we don't use many airless bottles. I believe that with the expansion of consumer demand, it will make more progress to meet the needs of different grades of skin care products. Through the above introduction, I believe that everyone has a considerable understanding of airless bottles. Everyone knows the role of this kind of bottle. I believe that the application will be more extensive in the future.
The contents of the airless bottle can be completely isolated from the air to prevent the product from being oxidized and deteriorated due to contact with the air, and the breeding of bacteria, and its high-tech concept enhances the product level. The vacuum bottle in the market is composed of a cylinder into an ellipsoid container and a piston at the bottom. Its design principle is to use the contraction force of the spring to prevent air from entering the bottle, resulting in a vacuum state, and to use atmospheric pressure to push the piston at the bottom of the bottle forward. However, because the spring force and atmospheric pressure cannot give enough force, the piston cannot be too tightly attached to the bottle wall, otherwise the piston will not be able to move forward due to excessive resistance; on the contrary, if the piston is to move forward easily and easily leak material, Therefore, airless bottles have very high professional requirements for manufacturers.
The purpose of the vacuum bottle is to isolate the substance from the air, so as to ensure that the substance in it is oxidized and bacteria are produced, thus affecting our normal use. It can be said that its high-tech concept can improve the grade of products, of course, the requirements for producers are greatly improved, and specialized production is required.
Because it saves a lot of parts in the vacuum, it saves a lot of resources and is particularly good in terms of environmental protection. Because the structural requirements are relatively high, this also places high requirements on manufacturers. I believe that the probability of problems in our use will be very low. Packaging cosmetics in airless bottles can not only ensure the quality of the cosmetics, but also make the cosmetics look generous.

Posted by: bottlempactes at 05:32 AM | No Comments | Add Comment
Post contains 535 words, total size 3 kb.

The unlimited development potential of the cosmetics market has allowed more and more capital to enter this field. Competition in the cosmetics market is also extremely fierce. For cosmetic container packaging companies, this means a huge market opportunity. However, in the current market, cosmetics companies have begun to keep improving the appearance and design of cosmetic containers, reaching a demanding situation.

For the cosmetic container design of cosmetic packaging bottle manufacturers, well-known cosmetics companies are increasingly emphasizing their artistic conception and artistry. Internationally renowned cosmetics companies have begun cross-border cooperation and invited well-known fashion designers and artists to design. These cosmetic containers have been born From the moment it was given new values ​​and cultural connotations. Cosmetics can often receive media attention. It can be said that they have gained marketing opportunities since they were born. For domestic cosmetics companies, there are more design materials and space for the design of cosmetic containers. Adding more traditional elements to cosmetic containers will be welcomed by domestic cosmetic consumers.

Compared with the brand cooperation of the outer packager, the image of the product needs more investment in cross-border, but for the brand implanted in the image, whether it is a shared bicycle or a popular clothing, products incorporating new elements can bring users With new user experience, cross-border brands have a more comprehensive brand image and more user exposure.
In addition, cross-border cooperation between brands is still infiltrating consumers in the form of "out of nothing". Information changes are becoming more frequent, and consumers have long been unable to remember the painless content. Cross-border cooperation has provided more possibilities for brand marketing. It is expected that more brands will cooperate and unlock new gestures to stimulate consumers' nerves.
With the explosive growth of China's cosmetics market, the development of cosmetic container packaging enterprises is also ushering in the spring, facing huge market opportunities and development prospects. At the same time, the fierce competition in the cosmetics industry and the increasingly fierce visual economy, cosmetics brands are also paying more and more attention to the appearance of cosmetics. Whether the materials are high-grade or not, and the feel is fine and delicate, they have become factors that affect consumers' purchase decisions. Cosmetics are now more than just beauty. The daily necessities for female skin care and beauty have also become a kind of "furnishings" for viewing.
This is especially true for famous brand cosmetics. Well-known cosmetics companies are increasingly focusing on their artistic conception and artistry. Internationally renowned cosmetics companies have begun to conduct cross-border cooperation and invite well-known fashion designers and artists to design. These cosmetic containers have been given new values ​​and cultural connotations from the moment they were born.
Regarding this trend, industry insiders said that cosmetics are mainly consumer products for women, and exquisite appearance is an essential factor. It can be said that exquisite cosmetics have already gained marketing opportunities since they were born. For domestic cosmetics companies, there is more room for development and available materials in the design of cosmetic packaging. The integration of my country's extensive and profound traditional cultural elements into the design of cosmetic containers will surely be welcomed by domestic consumers.

Posted by: bottlempactes at 03:41 AM | No Comments | Add Comment
Post contains 534 words, total size 4 kb.

PET is a milky white or light yellow highly crystalline polymer with a smooth and shiny surface. Creep resistance, fatigue resistance, abrasion resistance, good dimensional stability, low abrasion and high hardness, with greater toughness among thermoplastics: good electrical insulation performance, less affected by temperature, but poor corona resistance . Non-toxic, weather resistance, good chemical resistance stability, low water absorption, resistance to weak acids and organic solvents, but not immersed in hot water and alkali. PET resin has a high glass transition temperature, slow crystallization speed, long molding cycle, long molding cycle, large molding shrinkage, poor dimensional stability, crystallization molding is brittle, and low heat resistance.
Through the improvement of nucleating agent, crystallization agent and glass fiber reinforcement, PET has the following characteristics in addition to the properties of PBT:
1. The heat distortion temperature and long-term use temperature are higher among thermoplastic general engineering plastics;
2. Because of the high heat resistance, the reinforced PET is immersed in a solder bath at 250°C for 10S, and it hardly deforms or discolors. It is especially suitable for preparing electronic and electrical parts for soldering;
3. The bending strength is 200MPa, the elastic modulus reaches 4000MPa, the creep and fatigue resistance is also very good, the surface hardness is high, and the mechanical properties are similar to thermosetting plastics.
4. Since the ethylene glycol used in the production of PET is almost half the price of the butylene glycol used in the production of PBT, PET resin and reinforced PET are the lower prices among engineering plastics and have a high cost performance.
PET is a clear, lightweight form of polyester that is extruded or molded into plastic bottles and containers for food and beverage, cosmetic containers, and many other consumer products. Like glass, PET is hygienic, strong, resistant to attack by microorganisms, does not react with food or beverages, and will not be biodegradable. Its safety for food and beverage use is confirmed by health authorities around the world. But unlike glass, PET is very lightweight, simple, transportable and will not break, which is why it can be used in cosmetic food and beverage packaging.
PET has been approved as safe for contact with food and beverages through the US FDA, Health Canada, European Food Safety Agency and almost all other health and safety agencies in the world. PET has been approved as safe for contact with food and beverages through the US FDA, Health Canada, European Food Safety Agency and almost all other health and safety agencies in the world. It has been used in food and beverage containers for decades without any known adverse effects. Extensive research on PET and PET packaging has repeatedly shown that it is safe.

Posted by: bottlempactes at 06:17 AM | No Comments | Add Comment
Post contains 458 words, total size 3 kb.